Advanced Operation - KlipXtreme LiteTouch KTE-005 Manual De Instrucciones

3. When the battery is fully charged, the LED
indicator lights will become solid white.
4. While the earbuds are being charged, the red
indicator on each side lights up. When fully
charged, the LED will change to solid blue.
This process will normally take about an hour.
5. The fully charged buds have power for up to
4 hours of talking time or up to 80 hours of
standby time. However, these times may vary
depending on the mobile device used, on the
usage profile, and on the calling/ listening
habits of each individual user.
3.2. Turning your earbuds on or off
1. The earbuds will automatically turn on as
soon as they are taken out from the charging
case. As they are equipped with TWS
technology they will start synchronizing with
each other and pairing at the same time, as
well.
2. If you have the earbuds on you and they are
turned off, you need to touch the soft button
for about 3 seconds to turn them on. A tone
will be heard alerting of this event.
3. To turn the earbuds off, touch the soft button
for about 5 seconds again. A tone will be
heard and the LED will turn off on both sides
upon shutting off.

4. Advanced operation

4.1. TWS pairing
1. Simply take the earbuds out of the charging
case, or turn them on as it has been
instructed previously. The earphones will
blink blue momentarily as they sync with
each other automatically, and then enter into
mobile pairing mode.
4.2. Pairing your earbuds with a mobile device
1. Simply take the earbuds out of the charging
case, or turn them on as it has been
instructed previously.
2. Set your Bluetooth ®
wireless earbuds.
3. Place the phone and earbuds within one
meter of each other.
4. After both earbuds have synchronized with
each other, the LED light on one of the
earphones will randomly blink blue, while the
other one will blink red and blue alternatively
to indicate that they have entered into pairing
mode.
5. Select the KTE-005 earbuds from the list of
newly discovered devices in your phone.
6. Accept by pressing Yes or OK on the device. If
prompted, enter the passkey 0000 (4 zeros). Your
device will confirm when pairing is complete.
phone to "discover" the