Publicidad
Idiomas disponibles
Idiomas disponibles
STEP2 (Fig.14)
Using the 6mm hexagon head rail mounting
bolt supplied, slide 2 bolts in
each side of the rail through the cutouts
provided.
STEP3 (Fig.11)
Attach the opener head to the steel track.
Assembly the 2 "U" Hanging brackets with
6mm nuts supplied
STEP4 (Fig.11)
Place the Aluminum track and opener head assembly centrally on the garage floor, with the
open head furthest away from the door. Lift the front of the track up to the door bracket.
Insert the pivot pin and secure it with the split pin supplied.
STEP5 (Fig.11)
Lift and support the opener head (with a ladder) so it is positioned centrally and level. Fix the
opener and track on ceiling by Iron bracket A & B. WARNING: Do not allow children around the
door, opener or supporting ladder Serious.
injury and/or damage may result from failure to follow this warning.
STEP6 (Fig.11)
Select and attach the straight arm and bend arm. Position and bolt the arms to the top edge
of the door using the bolts supplied. lift the garage door until the shuttle locks into the drive
chain. Now, ready to program the openers.
Battery backup Assembly (optional)
Option 1 - Top Fixed
STEP1 (Fig.15)
Assemble the battery & battery bracket like the photo, fix by screws supplied. STEP2 (Fig.15)
Join the battery to opener, find the Fig.16.
10
Figure 14
Keep Working
Publicidad
