Publicidad
Instructions for Use
IPCMini Shutdown
To switch off the HV channel:
Keep the HV ON/OFF push button pressed for at least 3 seconds.
For further details on using the controller and for a description of the information
appearing on the display, refer to the section "Technical Information".
Emergency Stop
In situations of emergency, to switch off the unit and the high voltage
WARNING
channel, remove the power cable from the rear panel.
Maintenance
The IPCMini does not require any maintenance. Any work performed on the
system must be carried out by authorized personnel. Before carrying
out any operation on the system, it must be disconnected from the power supply.
If a fault occurs, it is possible to use the Agilent repair service.
Replacement controllers are available on an advance exchange basis through
Agilent.
WARNING
Before carrying out any work on the controller, disconnect it from
the supply.
If a controller is to be scrapped, it must be disposed off in accordance with the
specific national standards.
Agilent IPCMini Ion Pump Controller User Manual
161
Publicidad
