PARTS
Air Outlet
(located on back)
Probe Storage
Main Unit
Non-stick
Crisper Plates
(One for each drawer)
To order additional or replacement parts and accessories, visit ninjakitchen.eu
5 ninjakitchen.eu
Air Intake Vent
Control Panel
Digital Cooking
Probe
Non-stick Drawers
(One for each Zone)
GETTING TO KNOW YOUR AIR FRYER
When setting time, the digital display shows HH:MM.
FUNCTION BUTTONS
MAX CRISP: Best for cooking smaller
quantities of frozen food such as French
fries and chicken nuggets, which may need
a high temperature.
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Use the unit as an oven for tender
meats and more.
REHEAT: Revive leftovers by gently warming
them, leaving you with crispy results.
DEHYDRATE: Dehydrate meats, fruits and
vegetables for healthy snacks.
BAKE: Create decadent baked treats
and desserts.
OPERATING BUTTONS
Control the output for the drawer
1
on the left (Zone 1).
Control the output for the drawer
2
on the right (Zone 2).
LEFT arrows: Use the arrows on the
left-hand side of the display to select the
desired cook temperature or protein type.
BEFORE FIRST USE
1
Remove and discard any packaging material, promotional labels and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings and important safeguards to
avoid any injury or property damage.
3 Wash the drawers and crisper plates in hot, soapy water, then rinse and dry thoroughly.
The drawers and crisper plates are the ONLY dishwasher safe parts. However to extend
the life of the drawers we recommend hand-washing. NEVER clean the main unit or the
Probe in the dishwasher.
4 When using this appliance, provide at least 6 inches (15 cm) of space above and on all
sides for adequate air circulation.
RIGHT arrows: Use the arrows on the right-
hand side of the display to select cook time
or cook level.
SYNC button: Automatically syncs the
cook times to ensure both zones finish at
the same time, even if if they have different
cook times.
MATCH button: Automatically matches
zone 2 settings to those of zone 1 to cook
a larger amount of the same food or cook
different foods using the same function,
temperature and time.
PROBE button: Use to select Small Preset,
Large Preset or Manual when using the
probe.
Power button: The
button turns the
unit on and also shuts it off and stops all
cooking functions.
STANDBY MODE: After 10 minutes with no
interaction with the control panel, the unit
will enter standby mode.
HOLD MODE: Hold will appear on the
unit while in SYNC mode. One zone will
be cooking, while the other zone will be
holding until the times sync together.
ninjakitchen.eu
6