Ninja Foodi MAX AF451EU Manual De Instrucciones página 7

COOKING IN YOUR AIR FRYER – CONT .
MATCH (without Probe)
To cook a larger amount of the same food,
or cook different foods using the same
function, temperature, and time:
1 Place ingredients in the drawers, then
insert drawers in unit.
2 Zone 1 will remain illuminated. Select the
desired cooking function using the dial.
Use the left arrow to set the temperature,
and use the right arrow to set the time.
3 Press the MATCH button to copy the
zone 1 settings to zone 2. Then Press the
dial to begin cooking in both zones.
4 "End" will appear on both screens when
cooking ends at the same time.
5 Remove ingredients by tipping
them out or using silicone-tipped
tongs/utensils.
11 ninjakitchen.eu
Starting both zones at the same time,
but ending at different times:
1 Select zone 1, then select the desired
function using the dial. Use the left
arrow to set the temperature.
2 Use the right arrow to set the time.
3 Select zone 2 and repeat steps 1 and 2.
4 Press the dial to begin cooking in both
zones.
NOTE: If you decide the food in one of
the zones is done cooking before the
cook time is up, you can STOP A ZONE.
Select that zone, then press START/STOP.
See page 12 for further instructions.
5 When cooking is complete in each zone,
the unit will beep and "End" will appear
on the display.
6 Remove ingredients by tipping
them out or using silicone-tipped
tongs/utensils.
ENDING THE COOK TIME IN ONE
ZONE (WHILE USING BOTH ZONES)
1 Select the zone you would like to stop.
2 Press START/STOP to end cooking.
3 "End" will appear on the display.
Cooking will continue in the other zone.
PAUSING COOKING
Cooking will automatically pause when
a drawer is removed. Re-insert drawer to
resume cooking.
WHEN USING IN SYNC or MATCH MODE
If you open a drawer, the other drawer will
automatically pause so that cooking will still
finish at the same time. Reinsert drawer to
continue cooking in both zones.
NOTE: If during cooking when using
SYNC a drawer is removed for longer
than 2 minutes, then the program will be
cancelled. You will need to re-program
each zone to resume cooking.
COOKING IN A SINGLE ZONE
To turn on the unit, plug the power cord into a
wall socket, then press the power button.
Max Crisp
NOTE: There is no temperature adjustment
available or necessary when using the Max
Crisp function. The temperature is preset
to 240°C
1 Install crisper plate in the drawer, then
place ingredients in the drawer, and insert
drawer in unit.
2 The unit will default to zone 1 (to use
zone 2 instead, select zone 2). Select
MAX CRISP.
3 Use the right arrow to set the time in
1-minute increments up to 30 minutes.
Press the dial to begin cooking.
4 When cooking is complete, the unit will
beep and "End" will appear on the display.
5 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.
ninjakitchen.eu 12