Marmitek WHE4 Manual Del Usuario página 9

4K Receiver
Red (blinking)
Blue (blinking)
Blue
3 Frequently asked questions (FAQs)
Tip: Testing over a long distance is difficult. First, place the 4K
transmitter and receiver in the same room (minimum 2 metres apart)
to test if everything works and only then place the 4K receiver in
another room.
No (or poor) image and sound on TV or projector
Ensure that the ON/OFF switches at the back of the transmitter and receiver are
•
in the ''ON'' position.
Ensure that all HDMI cables are connected properly or replace them.
•
Ensure that the HDMI source is turned ON and the correct HDMI input is
•
selected on the TV.
Ensure that the HDMI source is set to a correct video resolution. If necessary,
•
consult the user manual of your HDMI source.
Disconnect the power adapters from the wall socket and reconnect them to
•
reboot the Marmitek WHE4.
No or bad connection between the 4K transmitter and 4K
receiver
Move the 4K transmitter and/or the 4K receiver from the immediate vicinity
•
of the connected HDMI sources and Wi-Fi equipment. These may affect the
range.
Slightly adjusting the position of the 4K transmitter and/or 4K receiver may
•
already help out.
Too much distance between 4K transmitter and 4K receiver. Try using shorter
•
distances.
I do have picture, but no (or bad) sound
The Marmitek WHE4 supports up to 2CH PCM stereo.
Check the audio setting in the settings menu of the connected HDMI source and
•
manually set it to 2CH PCM stereo when the automatic setting does not work.
Marmitek WHE4™
Starting up
Waiting for connection
Connected
9