Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Safety Precautions
Before using the AxySpin R refrigerated microcentrifuge for the first time, please read this entire
operating manual carefully. To guarantee problem free, safe operation, it is essential to observe the
following points:
Operation Safety Precautions
1.1.
When using infectious, radioactive, toxic and other solutions which may pose health risks, please
observe the appropriate safety precautions.
Do not use this machine in a potentially explosive environment or with potentially explosive
chemicals.
Install the machine in location free of excessive dust.
Avoid placing the machine in direct sunlight.
Choose a flat, stable surface capable of withstanding the weight of the machine.
Install the machine in the room temperature 15~30°C, relative humidity 20~80%.
Don't block the air vents.
Make sure the power source conforms to the required power supply specifications.
To avoid electric shock, make sure the machine is plugged into a grounded electric outlet.
Do not allow water or any foreign objects to enter the various openings of the machine.
Switch off the power switch before cleaning or performing any service on the machine, such as
replacing the fuses.
The rotor and the rotor lid must always be installed securely on the motor shaft.
Always load the rotor symmetrically. Each tube should be counterbalanced by another tube
of the same type and weight.
To guarantee sufficient ventilation, ensure that the centrifuge has at least 30 cm of free
space on all sides, including the rear.
Repair should be carried out by Axygen Scientific' authorized service personnel only.
Use original spare parts and accessories only.
Warning Label: Please be aware of the danger of electric shock or other dangers.
AxySpin R™ Refrigerated Microcentrifuge
1
© 2016 Corning Incorporated. All Rights Reserved.
Publicidad
