SICE S 100 PL Manual De Instrucciones página 56

Its absolutely innovative operating princi-
ple comprises:
- A wheel positioning system that makes use
of the wheel inner side and the machine
axial mounting turntable as references (an
optional reverse rim kit is supplied for rims
with drop centres on the inner side).
- An efficient manual wheel clamping sy-
stem, which makes use of the rim central
hole by means of a handle and cones (an
optional clamping kit is supplied for rims
with no central hole).
- A pneumatic bead breaking unit consi-
sting of two bead breaker disc holders.
Its pneumatic vertical movement is inde-
pendent and activated from the console;
the disc horizontal positioning is manual,
mechanically activated from the console
and it allows the simultaneous positioning
of the bead breaker discs. Bead breaking
is ensured by the disc movement, with a
controlled penetration commanded by an
operator.
- A head, installed on a mobile column with
a rear opening, consists of a fixed suppor-
ting nucleus that facilitates tyre mounting
and a pivoted mobile fixed nucleus that
facilitates an optimal tyre demounting
without using the bead lifter lever*.
* In a very few cases, an accessory supplied called
manual "help" may be of use in simplifying de-
mounting where excessive lubricant has been applied
or for tyres coupled to special rims.
- A pedal-controlled pneumatically opera-
ted wheel lift (optional) which loads and
unloads the wheel to and from the working
position
With the S 100 PL tyre changers the following
aims have also been achieved:
- Minimised physical effort on the part of
the operator
- No risk of damage to rim and tyre
Each machine carries a plate with its iden-
tification data and some technical data.
As well as the manufacturer's details, it
indicates:
Mod. - Machine model; V - power supply voltage
56
in Volts; A - Input voltage in Amperes; kW - Ab-
sorbed power in kW; Hz - Frequency in Hz; Ph
- Number of phases; bar - Operating pressure in
bar; Serial No. - Machine serial number; ISO
9001 - Certification of the company's Quality
System; EC - EC marking.
WARNING
It is forbidden to modify or remove the
data in the plate.
TECHNICAL DATA
- Overall dimensions (see fig. 7):
- Wheel dimension range:
.......................... from 12" to 28"
............................................15"
(from wheel supporting base)
- Turntable:
........................................ flanged
.............................................. on cone
........................ mechanical-manual
...2-speed motor-inverter unit
................................1200 Nm
.................................6-15 rpm
- Bead Breaking Unit:
........................................................... disc
manual with mechanical clamping
.........................................guided
........1080 mm (42")
........................
....A = 670 mm
(see diagram page 13)
User Manual S 100 PL