SICE S 100 PL Manual De Instrucciones página 78

Mounting the tyre
- Grease both the tyre (A) beads.
- Place the tyre on the rim (B)
- Operate pedal (13) to move the head into
the working position.
NB: The tool is already in the correct
position for mounting the tyre, unless the
type of rim has been changed.
- Place the bottom bead of the tyre under-
78
neath the tool and at the same time apply
a little pressure to the tyre by hand while
starting to rotate the wheel (pedal 15) for
easier bead insertion.
- Rotate until tyre mounting is complete.
25
- Position the upper tyre bead.
Take care that the tyre does not slip
underneath the tool.
- Lower the bead breaker disc (control 21)
(A) until it is level with the well of the rim
and make enough room for the clamp to
be inserted.
25a
26
27
User Manual S 100 PL