- Whenever possible, the rear part of the appliance should
not be too close to the wall to prevent it from touching or
reaching the hot parts (the compressor and the condenser).
To avoid risk of fire, follow the installation instructions.
- Make sure the power cord is accessible after installation.
- All electrical work required to maintain this appliance must
be carried out by a qualified electrician.
- Clean the surfaces that come into contact with food and
with the accessible draining systems regularly.
REFRIGERANT
- Isobutane refrigerant (R600a), contained within the
refrigeration circuit of the appliance, is a natural gas with
a high level of environmental compatibility; however,
it is flammable. Make sure that no components of the
refrigeration circuit have been damaged during the transport
and installation of the appliance.
- WARNING: the refrigerant and the insulator gas are
flammable. When disposing of the appliance, only dispose
of it at an authorised waste-disposal facility. Do not expose
it to flames.
- WARNING: the device contains refrigerant and gases in the
insulation. The appliance and gases must be disposed of
professionally, as they may cause injuries to eyes or ignition.
Make sure the refrigeration-circuit pipe is not damaged
before disposing of it correctly.
-
damaged:
- Avoid open flames and sources of ignition.
- Completely air the room where the appliance is located.
12
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 12
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 12
WARNING: risk of fire. If the refrigeration circuit is
11/1/23 13:08
11/1/23 13:08