cecotec COOLMARKET COOLMARKET SBS 430 WHITE E Manual Del Usuario página 61

During operation, the refrigerator releases heat into the environment. Therefore, you should
leave at least 300 mm of free space at the top, more than 100 mm on both sides, and more than
50 mm at the rear of the refrigerator.
Width (mm) Depth (mm)
839 637
Fig. 2
Please note
Figure 2 only illustrates the space required for the refrigerator.
Stable surface
Place the refrigerator on a solid, flat surface to keep it stable, otherwise vibrations and noises
will occur.
Ensure a ventilation free of obstacles around the refrigerator.
Preparing for use
Waiting time
Once the refrigerator is installed and clean, do not turn it on immediately, wait at least 4 hours
before connecting it to the power supply.
Cleaning
Check the position of the shelves and drawers in the interior of the refrigerator and clean the
interior with a soft cloth.
Switch-on
Connect the plug into a power socket to switch on the refrigerator. After one hour, open the
freezer compartment door: if the temperature inside the freezer compartment has dropped,
the cooling system is running normally.
Food storage
- Once the refrigerator is running, insert the food.
- When the temperature is high, food may take longer to cool down completely (try to open
the refrigerator doors as infrequently as possible).
If the refrigerator is installed in a wet place, you must check the earthed cord and the leakage
breaker are working normally. If vibration noises occur due to contact of the refrigerator
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 61 02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 61
Height
A (mm) B (mm)
(mm)
1763 1447 1013
BOLERO COOLMARKET SBS 430 WHITE / INOX / DARK E
ENGLISH
C (°) E (mm) F (mm)
140 50 100
61
11/1/23 13:08 11/1/23 13:08