cecotec COOLMARKET COOLMARKET SBS 430 WHITE E Manual Del Usuario página 68

ENGLISH
Replacing the light bulb
The refrigerator has a LED light with low consumption and a long shelf life. In case of
malfunction, contact the official Technical Support Service of Cecotec. The light bulb can only
be replaced by the manufacturer.
Note:
If the power cord and/or plug are damaged or dusty, electric shock and fire may occur. If
there is any malfunction, disconnect the cord and contact the Technical Support Service
of Cecotec.
7. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting Cecotec Technical Support Service.
Fault
The
refrigerator
does not work.
Abnormal
noise.
Low cooling
efficiency.
68
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 68 02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 68
Possible causes
The refrigerator is not connected to
the mains.
The circuit breakers or fuses are
damaged.
There is no electricity or there has
been a power cut.
The refrigerator is not stable.
The refrigerator is in contact with
the wall.
The food introduced is hot or there
is too much food.
You open the door too often.
The door gasket has objects that do
not allow to close it completely.
The refrigerator receives direct
sunlight or is close to a heat source.
The refrigerator is not well
ventilated.
The selected temperature is too
high.
Possible solutions
Plug the refrigerator into the
mains.
Open the door and check the
light is on.
Check the electrical installation
and protection elements.
Set the adjustable feet of the
refrigerator.
Separate the refrigerator from
the wall.
Introduce food in the
refrigerator when it is at room
temperature.
Check and close the door.
Remove the refrigerator from
the heat source.
Keep the recommended
distances in the installation
section so the refrigerator is
well ventilated.
Set a suitable temperature.
11/1/23 13:08 11/1/23 13:08