Cebora WIN TIG AC DC 180 M Manual De Instrucciones página 24

4.1.3 SET START-UP MODE (PARAGRAPH 7
)
4.1.4 SETTING FOR PULSE WELDING (SEE PARA-
GRAPH 8)
PULSE ON -XP is selected see paragraph 8.2.
If AC processes have been selected, the parameter set-
ting screens will follow.
If the "WIZ" option is not used, see below for de-
scription of the procedure for full adjustment of the
welding machine
4.2 ADJUSTMENT OF WELDING PARAMETERS (SEC-
TOR R)
By way of example, the procedure for adjusting Pre-Gas
time is described.
24
Select and
confirm the
s t a r t - u p
mode.
The next
choice is
a u t o m a t -
ically dis-
played.
the next parameter, or turn knob B to select the desired
parameter.
PULSE
If
OFF is se-
lected, the
main screen
is displayed.
If PULSE
ON is se-
lected, see
p a r a g r a p h
8.1, and if
Starting out
from the
main screen,
select and
confirm R
sector to
access ad-
justment of
the welding
parameters
as in table 1.
Select the
desired pa-
rameter. The
p a r a m e t e r
activates in
red.
Confirm and
set the se-
lected pa-
r a m e t e r .
Then press
to confirm
the setting
and auto-
m a t i c a l l y
move on to