Automatic Mode - Cebora WIN TIG AC DC 180 M Manual De Instrucciones

7 CHOICE OF START-UP MODE (SECTOR O)
By adopting this method, it is possible to select, modify
and confirm all the types of start-up modes presented
below.
NOTE
The red arrows indicate the movement of pressing
or releasing the welding torch trigger.
7.1 MANUAL MODE (2T):
mode appropriate for brief welding or automated
robotized welding.
In this position, the pedal Art. 193 can be connected

7.2 AUTOMATIC MODE:

suitable for long duration welding.
7.3 THREE-LEVELS MODE:
Select and
confirm sec- currents are restored.
tor O relative
to start-up
modes.
7.4 FOUR-LEVELS MODE:
Select and
confirm the
s t a r t - u p
mode.
.
Choice of spot welding and pause time modes leads to
a new dialog screen
The welding machine presets automatically for high-
frequency ignition (paragraph 6))
Times of the currents are controlled manually;
With this mode, the operator can introduce an inter-
mediate current and restore it during welding.
This symbol means that the welding torch
trigger must remain pressed for more than
0.7 seconds to terminate welding.
7.5 MANUAL SPOT WELDING (2T):
Spot weld-
ing time acti-
vates in red,
then press
knob B
27