Publicidad
Idiomas disponibles
Idiomas disponibles
Simple setup
Making the connections
Connect the AC power supply cord only after all the other connections have been made.
Connect the speaker cables.
Connect the AM loop antenna.
AM loop antenna
Stand the antenna up on its base. Keep the loose antenna
cord away from other wires and cords.
FM outdoor antenna
FM outdoor antenna (not included)
•
Never use an outdoor antenna during a lightning storm.
•
You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•
Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a
window or other convenient location.
4 4
Insert
fully
75 Ω coaxial cable
(not included)
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position with the
least amount of interference.
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Do not use an AC power supply cord from other equipment.
Conserving power
The unit consumes approx. 0.35 W even when it is turned off with
[8, POWER]. To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. Remember to reset the
radio stations and any other memory items before using the unit again.
AM outdoor antenna
Adhesive tape
FM indoor antenna
To household
AC outlet
Publicidad
