AHT MONTREAL Serie Manual De Instrucciones página 20

3 | Setup and installation
Fig. 3: Setup
Minimum spacing for individual setup
All around: 100 mm
Minimum spacing for block setup
A= 0 mm
B= 125 mm
B
Fig. 4: Minimum spacing for block setup
Material and property damage due to congestion of the warm exhaust air (heat ac-
cumulation).
▪ The exhaust air must be able to escape freely at the rear of the device.
▪ Observe the minimum distances to the boundary walls and to other devices to avoid hindering
the air circulation.
▪ For block setup, the ventilation openings of the device cover must not be blocked.
▪ Superstructure may only be installed in agreement with the manufacturer.
Minimum spacing 100 mm.
20 / 64
Glass side panels with cover frame
DO NOT pull or push
Foamed parts
Pull or push here
A
NOTICE
AHT Cooling Systems GmbH | en
397482_2_1018