Publicidad
Idiomas disponibles
Idiomas disponibles
Avoid too much outdoor air coming into air-conditioned spaces.
Note that outlet air is cooler or heater than set room temperature.
Avoid direct exposure to outlet air as it may be too cool or hot.
Maintain a proper air distribution.Air outlet louvers should be used
to adjust the direction of outlet airflow, as doing so might ensure
more efficient operation.
12. Adjusting Air Flow Direction
Since warmer air rises and cooler air falls, the distribution of
warmed/cooled air around a room can be improved by positioning the
unit's louvers. The louver angle can be adjusted by pressing the
[SWING] button on the remote controller.
Caution
•
During heating operation, horizontal airflow will aggravate the
uneven distribution of room temperature.
•
The louver direction: horizontal airflow is recommended
during cooling operation. Note the downward air flow will
cause condensation on the air outlet and louver surface.
Close doors and windows.
Figure 11.2
Do not set the
temperature too
low
Figure 11.3
Figure 11.4
Adjust the air direction up and down
a. Auto-swing: Press SWING for the louver to swing up and
down.
b. Manual swing: Adjust the louver to improve the cooling or
heating effect.
c. When cooling adjust the louver horizontally.
d. When heating adjust the louver downward.
13. Maintenance
Caution
•
Before you clean the air conditioner, ensure it is powered off.
•
Check that the wiring is undamaged and connected.
•
Use a dry cloth to wipe the indoor unit and remote controller.
•
A wet cloth may be used to clean the indoor unit if it is very
dirty.
•
Never use a damp cloth on the remote controller.
•
Do not use a chemically treated duster on the unit or leave this
type of material on the unit to avoid damaging the finish.
•
Do not use benzene, thinner, polishing powder, or similar
solvents for cleaning. These may cause the plastic surface to
crack or warp.
Method for cleaning the air filter
a. The air filter can prevent the dust or other particles from
entering the unit. If the filter is blocked, the unit will not work
well. Clean the filter every two weeks when you use it regularly.
b. If the air conditioner is positioned in a dusty place, clean the
filter often.
c. Replace the filter if it is too dusty to clean (the replaceable air
filter is an optional fitting).
1. Take out the air intake grille
Push the grille switches simultaneously, as indicated in Fig.13.1.
Then pull down the air intake grille (together with the air filter, as
shown in Fig.13.2). Pull the air intake grille down to 45°, and lift it
up to remove the grille.
16
Figure 12.1
Figure 12.2
Figure 13.1
V.2
Publicidad
