Publicidad
Idiomas disponibles
Idiomas disponibles
About the temperature controls.
Not all features are on all models. Your controls may be similar to the following
About ExpressChill™ .
42
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on
usage and operating environment.
n
On some models, setting both controls to the warmest setting until the display flashes (off) will stop
cooling in both the freezer and refrigerator compartments.
On other models, setting either control to the warmest setting until the display flashes (off) will stop
n
the cooling to the freezer and refrigerator.
n
NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical
power to the refrigerator.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
(on some models)
How it Works
The ExpressChill™ feature is a system
of dampers, a fan and a temperature
thermistor.
The pan is tightly sealed to prevent the pan's
temperature from causing temperature
fluctuations in the rest of the refrigerator.
(on some models)
OR
The controls for this pan are located in the
top of the refrigerator or on the dispenser
with the temperature controls.
:
Publicidad
