Not all features are on all models.
50
Freezer Baskets
To remove, slide out to the stop position,
lift the front past the stop position, and
slide out.
On some models, the full extension basket
can be removed by pushing the basket all
Slide-Out Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position, and
slide out.
Fixed Freezer Shelves
To remove, lift the shelf up at the left side
and then bring the shelf out.
Deep Door Shelves
Detachable shelf extenders deepen and
enclose fixed door shelves, providing
more storage room and greater storage
flexibility.
Removable Beverage Rack
The beverage rack is designed to hold
a bottle on its side. It can be attached
to any slide-out shelf.
To install:
Line up the large part of the slots on
the top of the rack with the tabs under
the shelf.
Then slide the rack back to lock it
in place.
ShelfSaver
Rack
™
(on some models)
Use this rack to store
beverage cans for easy
access.
It can also hold a 9 x 13
baking dish.
the way to the back of the freezer. Lift up
until the back pins are disengaged. Lift the
entire basket up and pull out.
Make sure you push the baskets all the way back
in before you close the door.
Make sure you push the shelves all the way back
in before you close the door.
NOTE FOR DISPENSER MODELS: In order
to take full advantage of the tilt-out ice bin,
only store items on the shelf below the ice
bin that are no taller than the lowest point
on the bin.
To remove: Lift the shelf extender straight
up then pull out.
To replace: Engage the shelf extender in the
molded supports on the door and push in.
It will lock in place.
Door Can Rack
(on some models)
This door rack holds up
to 9 cans.
NOTE: This rack can only be
mounted in the top position
under the dairy bin.
1
2