Troy Lee Designs D4 Manual Del Propietário página 5

helmet no longer has the ability to absorb further impacts and protect your head. If you have any doubts,
for example, if you drop your helmet or if it is hit by something and you are not sure if the impact was
sufficient to damage the helmet, contact Troy Lee Designs before you use the helmet again. Illustration
depicts damage to the inner EPS liner after an impact that may not be visible to the eye.
11. DO NOT modify your helmet. It is very dangerous to drill holes or cut the shell and/or the shock
absorption liner. Modifications can seriously weaken the helmet. Modifying the retention system
weakens it, and may render the helmet useless in an accident. Removing parts such as the mouth guard
or rubber face rim can expose edges, which may injure you in an accident. Never sand or paint the outside
of the helmet. Always use approved Troy Lee Designs parts when replacing visors, screws, pads or any
other part. A weakened helmet may not provide head protection.
12. Always check your helmet before use. Check your visor screws and tighten if necessary. Check for
cracks in the helmet. If you find cracks or damage, stop using the helmet immediately. Plastic components
may start to wear out before 5 years from purchase. If you find deterioration in any part of a component,
either replace that component or get a new helmet. If any parts come loose and/or fall off while you're
riding, your vision may be blocked resulting in serious personal injury or death. Check the security of the
retention system and always make sure that the comfort liner and the cheek pads are attached before
you use the helmet.
13. DO NOT purchase used helmets or any used parts for the helmet. DO
NOT sell your helmet.
14. DO NOT wear anything between helmet and head.
15. DO NOT allow others to use your helmet and DO NOT use someone
else's helmet.
EN
EPS EPS