STERWINS 150C EPW.4 Manual De Instrucciones página 173

Any maintenance operations not covered by this chapter should be carried out by an Authorized
Sales and Service Centre.
Caution!
Always disconnect the plug from the power sources before carrying out any work
on the appliance.
• Cleaning the nozzle
--Disconnect the nozzle from the lance.
--Remove any dirt deposits from the nozzle hole using the cleaning pin.
• Cleaning the filter
Inspect the intake filter and detergent (if fitted) before each use, and clean in accordance with
the instructions.
Inspect the seal status of inlet nozzle, spear and 3 in 1 nozzle , remove dirt and debris from the
seals, if there have any crack/damage marks on it ,which will lead the water leakage ,please
replace with the new one accordingly .We additionally offer some spare seals in the machine
for the free replacement. Put the 3in1 nozzle, spear, inlet nozzle in a clean place, protected
from damage.
STORAGE AND TRANSPORT
Storage
Store the machine in a dry and well-ventilated place.
When placing the machine out of service for an extended period of time, remove the cleaning
agent and drain all of the water left in the hoses.
Transport
If shipping, use the original packaging wherever possible.
High pressure cleaner and its accessories in an area with a room temperature of at least 5
pump in the unit can be permanently damaged if it freezes.
DISPOSAL
Disposing of the machine
Machines which are labeled with the adjacent symbol must not be disposed of with household
rubbish. You must dispose of such old electrical and electronic appliances separately.
Please check the disposal options with your local authority. Old equipment that is disposed
of separately is sent for recycling or for other forms of re-use. This helps to prevent damaging
materials from being released into the environment.
Disposing of the packaging
The packaging consists of cardboard and labeled sheets that can be recycled. Please recycle
these materials.
8. MAINTENANCE AND STORAGE
173
C.The
o
EN