cecotec BOLERO COOLMARKET 4D 564 INOX E Manual De Instrucciones página 68

ENGLISH
from the water tank. Lift the cover on the other side in the same way and clean the tank
and the cover.
- Install the water valve by turning it clockwise after cleaning. When installing the tank
cover, fit one side first (do not press down all the way), then the other side. Reinstall the
water tank assembly at 45 degrees to the door. Press the outer edge of the water tank
slightly downwards so that it clicks into the door.
Please note
- The transparent silicone parts of the water valve may come off while removing the water
tank. If it were the case, remove and reinstall them by following the steps below:
1. Align the valve piece with the hole in the door and push it in.
2. Once the piece fits tightly into the hole, installation will be complete.
Filling up the water tank (Fig. 11)
Open the water-tank inlet cover (1). Slowly fill the tank with water up to the maximum filling
limit marked "2L". Then, close the inlet cover (1). To avoid spillage, use a narrow-holed container
to pour the water.
IMPORTANT
- Fill up the water tank with drinkable water only.
- External climate conditions directly influence the cooling time of water, i.e., in summer the
cooling time is longer than in winter.
4. INSTRUCTIONS ON FOOD STORAGE
Use precautions
- The refrigerator may not operate consistently (there may be some defrosting of the
contents, or the temperature may become too hot in the freezer compartment) if placed in
locations with a temperature outside of the temperature range for which it's designed for
a long period of time.
- The internal temperature may be affected by factors such as the location of the refrigerator,
room temperature, and door opening frequency, etc., and you should take these factors
into account if you decide to use any temperature-control devices.
Instructions on food storage
- When storing frozen foods, put them inside the freezer compartment.
- Do not put bottled or canned foods in the freezer to prevent cracking due to ice formation.
Before putting hot food in the refrigerator compartment, cool it down to room temperature
first for lower energy consumption.
- Write the date of freezing on the food packaging bag to make sure they don't stay frozen
for too long.
- Divide food into pieces and package them separately to ensure they freeze more easily and
B OL ER O CO OLM ARKE T 4D 56 4 I NOX/ DA RK /G LA S S E
68