VALBERG CNF 378 A X625C Instrucciones De Uso página 7

B
Using the appliance
1. Please power off this appliance before conduct this operation. Remove all food from door
shelves.
2. Remove the upper lefl hinge cover decorative cover, upper right hinge cover and upper
right hinge, and disconnect the right signal line (signal line terminal
the box body
upper hinge cover
decorative
cover
3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft
sleeve and stop on the door);
Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
decorative
cover
10
1 2
, ) at the top of
upper hinge
2
1
middle hinge
EN
B
Using the appliance
4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve
and stop on the door);
Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other
side of the hinge, and install the modified lower hinge to the other side of the box.
5. Change the refrigerator doar:
1) Remove the cover plate of the upper end cover of the refrigeration doar and the lefl
decorative cover. lnstall the upper shaft sleeve and the signal line of the doar body to the
other side and cover the upper end cover plate. Take out the right decorative cover from the
accessory bag and install it to the other side of the upper end cover.
2) Remove the doar self-locking, doar stop and shaft sleeve of the refrigeration doar, take out
the lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end
cover of the refrigeration doar, change the doar stop and shaft sleeve to the lefl side of the
lower end cover of the refrigeration doar.
11 EN