Miniland thermotalk plus 89068 Manual Del Usuario página 34

5.4.3. MEMORY MODE
1. Press [ ] and [
memory mode.
Press [ ] to display the data stored.
2. "-" will be displayed if no data is stored.
3. Maximum storage capacity is 15 sets of
data with date and memory
number shown.
4. The unit automatically returns to clock
mode 5 seconds after the last key has been
pressed.
Note: Press any key to stop the sound during the announcement.
5.5. RECOMMENDATIONS
1. When using for the first time, we recommend taking the reading 3 times
in the same ear. The maximum reading should be recorded in the case of
different results as there may be a slight difference of between (+/- 0.3°C,
+/- 0.5°F) if the thermometer is used continuously.
2. Wait only 30 seconds before taking another reading on the same patient
again to avoid excessive cooling of the skin.
3. For users in sound health, both ears are almost the same in terms of body
temperature. You should select the ear that shows a stable and relatively
higher temperature.
4. Please clean the ear before taking a reading.
NOTE: The unit may not function correctly in an environment with
electrostatic discharge so it may be necessary to reset the unit.
Set sleep
enabled
] in clock mode to enter
Memory no
34
Set sleep
disabled
Memory data
data