WHAT TO DO IF...
During operation of the appliance some
smaller but annoying trouble can often
occur, which does not require calling a
technician out. In the following chart infor-
mation is given about them to avoid un-
necessary charges on service.
The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.
Problem
The appliance is
noisy.
The buzzer sounds.
The Alarm icon flash-
ing.
upper or lower
square is shown in
the temperature dis-
play.
"dEMo" appears on
the display.
The compressor runs
continuously.
Possible cause
The appliance is not sup-
ported properly.
The temperature in the
freezer is too high.
The door is not closed cor-
rectly.
An error has occurred in
measuring the tempera-
ture.
The appliance is in dem-
onstration mode.
The Temperature regula-
tor may be set incorrectly.
The door is not closed cor-
rectly.
The door has been
opened too frequently.
The food temperature is
too high.
The room temperature is
too high.
The appliance operates discontin-
uously, so the stopping of com-
pressor does not mean being no
current. That is why you must not
touch the electrical parts of the
appliance before breaking the cir-
cuit.
Solution
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
Refer to "HighTemperature
Alarm".
Refer to "Door open
alarm".
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
Keep pressed approximate-
ly 10 sec the OK button
since a long sound of buz-
zer is heard and the display
shut off for a short while:
appliance start works regu-
larly.
Set a warmer temperature.
Refer to "Closing the
door".
Do not keep the door open
longer than necessary.
Let the food temperature
decrease to room tempera-
ture before storage.
Decrease the room temper-
ature.
ENGLISH
15