AEG A82900GNW0 Manual De Instrucciones página 19

REMOVING THE TRANSPORT SUPPORT
3
REAR SPACERS
FITTING THE DOOR HANDLES
1
3
2
2
4
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
lencing pad under the cabinet. Do
not remove this pad.
Install the spacers provided within the ac-
cessory bag as shown in the figure.
Install the spacers on the back side of the
panel.
(Example for right hinge performance)
The handles are supplied as a kit at deliv-
ery.
1. Screw the top handle bracket to the
handle rod.
2. Fit the bottom handle bracket on the
lower left-hand side of the door.
3. Fit the top handle bracket on the top
left-hand side of the door.
4. Screw the handle rod to the bottom
handle bracket.
Do not use excessive force and
overtighten the screws (max. 2
Nm) as you may damage the door
handles.
ENGLISH
19