Descargar Imprimir esta página

Signature Kitchen Suite UPWD3034ST Manual Del Propietário página 12

Ocultar thumbs Ver también para UPWD3034ST:

Publicidad

Idiomas disponibles

Idiomas disponibles

12
features
TIMER ON/OFF
The upper or lower TIMER ON/OFF serves as an extra
timer in the kitchen that beeps when the set time has run
out. It does not start or stop cooking. The TIMER ON/OFF
feature can be used during any of the other oven control
functions. The upper and lower timers can be operated
independently of each other.
Setting the Timer
1. Set both Oven Mode knobs to the OFF position.
2. Press either the upper or lower TIMER ON/OFF.
0:00 with
inside it appears and TIMER flashes in
HR
the display.
3. Turn the Time/Temp knob to set the desired time.
Turn the knob clockwise to increase the time and
counterclockwise to decrease the time.
note
If the upper or lower TIMER ON/OFF is not
pressed, the timer returns to the time of day.
4. Press the upper or lower TIMER ON/OFF to start
the timer. The display shows the set time counting
down.
5. When the set time runs out End shows in the
display. The indicator tones sound every 15 seconds
until the upper or lower TIMER ON/OFF is pressed.
6. To cancel the timer, press the upper or lower TIMER
ON/OFF once. The display will return to the time
of day.
note
If the remaining time is not shown in the display,
recall the remaining time by pressing the upper or
lower TIMER ON/OFF.
- Press the upper or lower TIMER ON/OFF once to
set the time in hours and minutes.
- Press the upper or lower TIMER ON/OFF twice to
set the time in minutes and seconds.
CONVECTION AUTO CONVERSION
When cooking using the convection mode (Conv. Bake,
Conv. Roast, and Crisp Conv.), the oven temperature is
automatically reduced by 25°F(14°C). The display will
show the changed temperature.
This feature is called auto conversion. Your oven comes
with this feature enabled.
To disable the auto conversion feature, do the following:
1. Set both Oven Mode knobs to the OFF position.
2. Press and hold START TIME for 3 seconds. Then
press START TIME once. Auto appears in the display.
3. Turn the Time/Temp knob to enable or disable the
feature.
4. Press START to accept the change.

Publicidad

loading