Publicidad
Idiomas disponibles
Idiomas disponibles
ChANgINg ThE OVEN LIghT
The oven light is a standard 10-watt halogen bulb for
ovens.
To replace lamps located on the side wall:
• Make sure oven and bulb are cool.
1. Unplug oven or disconnect power.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the housing
and the glass light cover.
4. Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of the
oven.
5. Gently twist the screwdriver blade to loosen the
glass light cover and remove it.
6. Remove bulb from socket.
7. Replace bulb, replace light cover by snapping back
into place.
8. Plug in oven or reconnect power.
Glass Light Cover
Flat blade screwdriver
To replace a lamp located on the top wall:
• Make sure oven and bulb are cool.
1. Unplug oven or disconnect power.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the housing
4. Support the glass light cover with two fingers to
5. Gently twist the screwdriver blade to loosen the
6. Remove bulb from socket.
7. Replace bulb, replace light cover by snapping back
8. Plug in oven or reconnect power.
Housing
Flat Blade screwdriver
y Before replacing the oven light bulb, DISCONNECT
y Make sure oven and bulb are cool.
y Wear gloves while changing the oven light. Glass
and the glass light cover.
prevent the cover from falling to the bottom of the
oven.
glass light cover and remove it.
into place and push the clip to hold the glass light
cover tightly.
Glass Light Cover
warning
the electrical power to the oven at the main fuse or
circuit breaker panel.
− Failure to do so can result in severe personal injury,
death, or electrical shock.
fragments from broken bulbs can cause risk of injury.
35
maintenance
Flat Blade
Clip
screwdriver
Bulb
Publicidad
