Publicidad
Idiomas disponibles
Idiomas disponibles
2 / INSTALLING YOUR APPLIANCE
Monophase line 220-240 V ~
16A fuse or differential
Electrical outlet
2 prong receptacle +e e a a r r t t h h
CEI Standard 60083
• • ELECTRIC CONNECTION
Electrical safety must be ensured by a correct
build-in. During fitting and maintenance
operations, the appliance must be unplugged
from the electrical grid; fuses must be
switched off or removed.
The
electrical
connection
performed before the appliance is installed in
the cabinet.
Ensure that:
- the electrical installation has sufficient
voltage,
- the electrical wires are in good condition
- the diameter of the wires complies with the
installation requirements.
Your oven must be connected with a
(standardised)
3 conductors of 1.5mm2 (1 live + 1 neutral +
earth) which must be connected to a
All manuals and user guides at all-guides.com
circuit breaker
supply cable
length 1.50 m approx.
should
power
cable
with
Monophase 20A Counter
220-240V ~ 50Hz
Power
220-240V ~
single-phase
intermediary of a 1 live + 1 neutral + earth CEI
60083 standardised power socket or via an
all-pole cut-off device or in compliance with
the installation rules.
Warning
be
The safety wire (green-yellow) is
connected to the appliance's terminal
and must be connected to the ground lead
of the electrical set-up.
In the case of connection to an electric wall
socket, it must remain accessible after
installation.
The fuse in your set-up must be 16 amperes.
If the power cable is damaged, it must be
replaced by the manufacturer, its After-
Sales Service Department or a similarly
qualified person to avoid danger.
7
EN
grid
via
the
Publicidad
