02
Connecting Up
Rear panel
IN
OUT
CONTROL
10
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1
(AUDIO) – i.LINK connectors
4-pin, S400 i.LINK connectors for connection
to i.LINK-equipped receivers and other
components. Each i.LINK connector acts
simultaneously as both input and output.
2
AV CONNECTOR
AV CONNECTOR 1 (RGB)-TV
Use a 21-pin SCART cable to connect to a TV
or monitor compatible with this type of
connection. Both audio (2 channel stereo)
and video (Video, S-video, and RGB) signals
are output from the AV CONNECTOR 1
(RGB)-TV (pages 12, 58).
AV CONNECTOR 2
Use a 21-pin SCART cable to connect to a
VCR (page 12).
3
AC IN
Connect the supplied power cord here, then
plug into a power outlet.
4
COMPONENT VIDEO OUT
High quality video output for connection to a
TV, monitor or AV receiver that has compo-
nent video inputs.
Connect using a commercially available
three-way component video cable.
10
En
1
(AUDIO)
S400
L
CENTER
OPTICAL COAXIAL
L
1
AUDIO OUT
(5.1ch)
R
SUB
R
WOOFER
FRONT
SURROUND
AUDIO
DIGITAL AUDIO
OUT
OUT
(2ch)
7
9
8
• You may find it useful to have the manuals
supplied with your other components
handy when connecting this player.
• If you come across any unfamiliar terms in
this section of the manual, take a look at
the Glossary starting on page 78.
2
AV CONNECTOR 1 (RGB)-TV
AV CONNECTOR 2
2
1
2
Y
P
P
B
R
S-VIDEO
VIDEO
COMPONENT VIDEO OUT
OUT
OUT
6
5
4
Be careful to match the colors of the jacks
and cables for correct connection (page 13).
5
VIDEO OUT (1&2)
Standard video output(s) that you can
connect to your TV or AV receiver using the
supplied audio/video cable (pages 11, 14,
15, 16).
6
S-VIDEO OUT (1&2)
S-Video output(s) that you can use instead of
the VIDEO OUT jacks (page 12).
7
AUDIO OUT (5.1ch)
Multichannel analog audio outputs for
connection to an AV receiver with
multichannel inputs (page 14).
8
AUDIO OUT (2ch)
Two channel analog audio outputs for
connection to your TV, AV receiver or stereo
system (pages 11–15).
9
DIGITAL AUDIO OUT – OPTICAL /
COAXIAL
Digital audio outputs for connection to a
PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver (page 15).
10 CONTROL IN / OUT
For passing remote control signals to other
Pioneer components (page 18).
3
AC IN