Publicidad
Idiomas disponibles
Idiomas disponibles
Controls and Displays
About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image.
Progressive scan video is available only from
the component video output. Use the
PROGRESSIVE button on the front panel to
switch the component video output between
interlace and progressive. With a DVD-Video
disc you can do this during playback, or
when the disc is stopped. For other types of
disc, the player must be stopped.
• If you connect a TV that is not compat-
ible with a progressive scan signal and
switch the player to progressive, you will
not be able to see any picture at all. In
this case, press the PROGRESSIVE
button on the front panel to swich back
to interlace (the PROGRESSIVE indica-
tor should be unlit).
• You can't switch video output when an
OSD is on-screen.
• The picture on some TVs may momen-
tarily break up when you switch the
video output of this player.
Compatibility of this unit with
progressive-scan TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE "STANDARD DEFINITION"
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
• This player is compatible with the
following Pioneer displays and monitors:
PDP-503HDE, PDP-433HDE.
03
21
En
Publicidad
