Pioneer DV-757Ai Manual De Instrucciones página 34

04 Getting Started
Video CD PBC menus
Some Video CDs have menus from which
you can choose what you want to watch.
These are called PBC (Playback control)
menus.
You can play a PBC Video CD without having
to navigate the PBC menu by starting
playback using a number button or track
skip button (¢) to select a track, rather
than the 3 (play) button.
Button
(RETURN) Displays the PBC menu.
Numbers
4
¢
34
En
SETUP TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ FL JOG
7 3 8
E E/
/
4 ¢ 1 ¡
PLAY MODE SURROUND
CLEAR
1 2 3 C
4 5 6
ENTER
7 8 9 0
TV CONTROL
What it does
Use to enter a numbered
menu option. Press ENTER to
select (or wait a few seconds).
Displays the previous menu
page (if there is one).
Displays the next menu page
(if there is one).
• After I load a DVD disc, it ejects automati-
cally after a few seconds!
Most likely, the disc is the wrong region
for your player. The region number
should be printed on the disc; check it
against the region number of the player
(which you can find on the rear panel).
See also page 9.
If the region number is OK, it may be
that the disc is damaged or dirty. Clean
the disc and look for signs of damage.
See also pages 72–73. Check also that
the disc is aligned properly in the disc
tray and that it's loaded label-side up.
• Why won't the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that it's
clean and not damaged. See pages 72–
73 for information on cleaning discs.
If a disc loaded correctly won't play, it's
probably an incompatible format or disc
type, such as DVD-ROM. See pages 8–9
for more on disc compatibility.
• There's no picture!
Check the front panel and make sure
that the VIDEO OFF indicator isn't lit. If
it is, press the VIDEO OFF button to
switch the video output back on. See
also page 20.
Also make sure that if your TV isn't
compatible with progressive scan video,
that the PROGRESSIVE indicator isn't lit.
If it is, press the PROGRESSIVE button
to switch the video output back to
interlace. See also page 20.