Publicidad
Idiomas disponibles
Idiomas disponibles
04
Getting Started
Switching on
After making sure that everything is con-
nected properly and that the player is
plugged in, press
front panel to switch the player on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
• The front panel
switches the player on and off. When the
player is off, it can only be switched
back on using the same front panel
button.
When the player is on, you can put it
into standby using the
button on the remote control.
STANDBY/ON
STANDBY/ON
26
En
STANDBY/ON on the
STANDBY/ON button
STANDBY/ON
AUDIO/VIDEO
PROGRESSIVE VIDEO OFF
Î
• When the player is in standby, you can
use the 0 OPEN/CLOSE and 3 (play)
buttons to switch the player on and
open the disc tray/start playing a loaded
disc.
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
switch your TV to VIDEO 1.
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
OPEN/CLOSE
)
$!
⁄
• This player features a screen saver.
When on, If the player is stopped or
paused and no button is pressed for five
minutes, the screen saver starts. See
Screen Saver on page 62 for how to
switch it on.
Publicidad
