Pioneer DV-757Ai Manual De Instrucciones página 16

02 Connecting Up
Connecting using i.LINK
If you have a receiver with an i.LINK connec-
tor, you can connect it to this player using
the supplied i.LINK cable.
The i.LINK connector outputs every kind of
digital audio that the player is compatible
with, including DVD-Video, DVD-Audio,
SACD, Video CD, CD and MP3. In contrast,
the optical and coaxial digital outputs do not
output SACD and multichannel DVD-Audio.
When playing DVD-Audio,*
discs over i.LINK, the digital audio is
jitterless if the connected receiver is compat-
ible with PQLS (rate control). See the
operating instructions that came with your
receiver for information on compatibility with
this feature.
* 1
Excluding any part of the disc that features
moving video (Video part).
• There may be cases where the PQLS/
rate control function and/or the i.LINK
audio does not work properly even when
connected to i.LINK Audio-compatible
equipment.
• Do not disconnect i.LINK cables or
switch off any components connected
using i.LINK while this player is on.
• Copy-protected 96kHz DVD-Video discs
are downsampled to 48kHz when using
the i.LINK connection.
16
En
1
CD or SACD
1 Use the supplied i.LINK cable to
connect one of the i.LINK connectors on
this player to an i.LINK connector on your
AV receiver.
i.Link
connector
AV receiver
(AUDIO)
S400
L CENTER
OPTICAL COAXIAL L
AUDIO OUT
IN OUT
(5.1ch)
R
R SUB
WOOFER
AUDIO FRONT SURROUND
DIGITAL AUDIO
CONTROL
OUT
OUT
(2ch)
• The arrow on the cable connector body
should be face down for correct
alignment with the connector on the
player.
2 Connect the VIDEO OUTPUT jack on
this player to a video input on your AV
receiver.
• The i.LINK connectors on this player do
not output video.
• The diagram shows a standard video
connection, but you can alternatively
use the S-video or component video
connections if they're available.
Video
input
AV CONNECTOR 1 (RGB)-TV AV CONNECTOR 2
1 2
1 2 Y P P
B R
S-VIDEO VIDEO
COMPONENT VIDEO OUT
OUT OUT