Publicidad
Fig.4
a. Insert the 38*38 Plug(#22) and the φ25 Plug(#25) into the part(#10).
b. Attach the part(#10) to the part(#2) using (1)M10*120 Hex Bolt(#19).
c. Insert theφ22 Plug(#24) into the part(#8).
d. Attach the part(#8) to the part(#10) using (1)M8*25 Hex Bolt(#33). Slide the Foam Roller(#18) onto the
part(#8).
e. Assemble the other Butterfly Arm using same method.
FYTTER |WWW.FYTTER.COM
PAG- 14
Publicidad
