Publicidad
Fig.5
a. Insert the 38*38 Plug(#22) and the φ25 Plug(#25) into the part(#7). Set theφ25 End Cap(#23) onto the
part(#7).
b. Attach the part(#7) to the part(#4) using (1)M10*60 Hex Bolt(#17).
c. Insert theφ22 Plug(#24) into the part(#3), and then insert the part(#3) through the part(#7). Slide the Foam
Roller(#18) onto the part(#3).
FYTTER |WWW.FYTTER.COM
PAG- 15
Publicidad
