KYORITSU KEW SNAP Serie Manual De Instrucciones página 13

Terminal Cover
⑨
Used to enclose the input terminals (COM and V/
OUTPUT terminal is in use, thus avoiding accidental application
of voltage to the instrument.
OUTPUT Terminal (for current measurement only)
⑩
Provides DC voltage in proportion to the reading on an AC or
DC current range. The voltage is used for such purposes as long
term monitoring with a recorder or other recording devices. This
terminal cannot be accessed on a voltage or resistance range.
COM Terminal
⑪
Accepts the black test lead for voltage or resistance measurement.
V/ Terminal
⑫ Ω
Accepts the red test lead for voltage or resistance measurement.
Safety Hand Strap
⑬
Prevents the instrument from slipping off the hand curing use.
Test Leads (M-7107A)
⑭
Connect to COM and V/
measurement.
Output Plug (M-8201)
⑮
Insert this plug into the OUTPUT terminal to obtain DC output
voltage. Connect suitable connection cord to the plug when it is
used.
Barrier
⑯
It is a part providing protection against electrical shock and
ensuring the minimum required air and creepage distances.
Terminal terminals for resistance
Ω
11
̶ ̶
) when the
Ω