KYORITSU KEW SNAP Serie Manual De Instrucciones página 27

8. Battery Replacement
⃝
T o avoid electric shock hazard, make sure to set the Function
Selector switch to "OFF" and remove the test leads from the
instrument before trying to replace batteries
⃝
D o not mix new and old batteries.
⃝
M ake sure to install batteries in correct polarity as indicated in
the battery compartment.
If the instrument is powered on, but the display blanks or
shown on the lower left corner of the display, replace the batteries.
a. Set the Function Selector switch to the"OFF" position.
b. Unscrew and remove the battery compartment cover on the
bottom of the instrument.
c. Replace the batteries observing correct polarity. Make sure to use
two new R6P batteries.
d. Replace and screw the battery compartment cover.
WARNING
#
CAUTION
25
̶ ̶
is