Publicidad
Idiomas disponibles
Idiomas disponibles
The symbol
#
must refer to related parts in the manual for safe operation of the
instrument.
Be sure to carefully read the instructions following each
in this manual.
DANGER is reserved for conditions and actions that are likely
#
WARNING is reserved for conditions and actions that can cause
#
CAUTION is reserved for conditions and actions that can cause
#
Following symbols are used on the instrument and in the instruction
manual. Attention should be paid to each symbol to ensure your safety.
This symbol is marked where the user must refer to the
#
instruction manual so as not to cause personal injury or
instrument damage.
Indicates an instrument with double or reinforced insulation.
Indicates that this instrument can clamp on bare conductors
when measuring a voltage corresponding to the applicable
Measurement category, which is marked next to this symbol.
Indicates AC (Alternating Current).
Indicates DC (Direct Current).
Indicates AC and DC.
⃝
N ever make measurement on a circuit in the following categories;
Measurement category
Measurement category
⃝
D o not make measurement when thunder is rumbling. Stop
measurement and take off the instrument from the object under test.
⃝
D o not attempt to make measurement in the presence of
indicated on the instrument means that the user
to cause serious or fatal injury.
serious or fatal injury.
minor injury or instrument damage.
#
(CAT.
Ⅳ
(CAT.
Ⅲ
DANGER
)
: over AC/DC600V
Ⅳ
)or lower
: over AC750V/DC1000V
Ⅲ
2
̶
̶
symbol
#
Publicidad
