Descargar Imprimir esta página

Remington X3 Power-X Serie Hair Clipper Giftpack HC3000GP Manual De Instrucciones página 6

Publicidad

ENGLISH
STEP 4 – TOP OF THE HEAD
Use the longer length comb attachment and set it to 24 mm then cut hair on top of the
head against the direction in which the hair normally grows.
Always work from the back of the head.
STEP 5 – THE FINISHING TOUCHES
Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed clipper at right angles to the head, tips of the blades lightly touching
the skin and then work downwards.
CARE FOR YOUR HAIRCLIPPER
Your clipper is fitted with high quality blades.
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
Always keep the attachment guide comb on the trimmer blade.
AFTER EACH USE
Ensure the appliance is switched off and
Brush the accumulated hair from the blades and body of the clipper. Do not submerge
the clipper in water.
To clean unit, wipe with a damp cloth and dry immediately.
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
WASHABLE BLADE CLEANING
The blades are washable under a running tap but must be removed before they are
cleaned in this way. Keep the body of the device dry at all times.
Take out the hex screws and disassemble the blade set. Brush and clean out
accumulated hair. Oil the contact surfaces of the blades and then reassemble.
CLEANING CAUTIONS
Do not use harsh or corrosive cleaners on the units or their blades.
Ensure the appliance is switched off and unplug from the main outlet before cleaning.
REMOVING THE RECHARGEABLE BATTERY
We strongly recommend that a professional removes the rechargeable battery. Parts of the
shaver case, and tools have sharp edges and may cause injury if not handled correctly.
The rechargeable battery must be removed from the appliance before it is scrapped.
Disconnect the charging adapter before removing the battery.
1. Ensure that the battery is fully discharged. To do this, operate the device until it stops.
2. Pry off and remove the top panel.
6
unplugged from the charger before cleaning.

Publicidad

loading