MBM PEE98A100I Manual De Uso E Instalación página 43

carefully using a non-abrasive cloth.
If necessary, repeat the operations
described above for a new cleaning cycle.
CLEANING FOR PROLONGED
DEACTIVATION /
When the appliance re-
mains idle for a long
time, perform all the de-
scribed daily cleaning
procedures.
When operations have finished, wait for
the machine to cool down and empty the
water cavity using the tap located under
the cavity (see chap. 7 / Instructions for
use - Location of main components).
Unscrew the drainage tap after positio-
ning a suitable container (material and
capacity) under the cavity. Fill the reci-
pient halfway to handle it safely.
Empty the container in compliance with
waste disposal procedures in force
in the country where the appliance is
used and reposition the emptied reci-
pient in its housing.
Repeat the aforementioned operations
until the water cavity is empty.
To conclude the operations see
chap. 5 / Deactivation.
OPERATION
Cleaning appliance and parts in
contact with foodstuff
Cleaning at commissioning
Cleaning flue / Checking thermo-
stat and micro switches
Checking safety valve
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
Air out the appliances and rooms
regularly.
SUMMARISED TABLE /
QUALIFICATION - OPERATION -
FREQUENCY
Before proceeding with the ope-
rations, see chapter 2 "Duties
and qualifications".
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical mains
and shut all the supply valves. Then
contact authorized customer service.
The authorized maintenance te-
chnician intervenes when the
generic operator was not able to pin-
point the cause of the problem, or
whenever restoration of correct ope-
ration of the appliance entails execu-
ting operations for which the generic
operator is not qualified.
If the power cable is damaged,
contact the authorised techni-
cal assistance service to have
it replaced.
Upon arrival after installation
- 19 -
MAINTENANCE
FREQUENCY
Daily
Yearly
Semestral
8.
EN