Symbols on the machine:
WARNING! Chainsaws can be
dangerous! Careless or improper use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
•
Approved protective helmet
•
Approved hearing protection
•
Protective goggles or a visor
Both of the operator 's hands must be
used to operate the chainsaw.
Never operate a chainsaw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Chain brake, activated (right)
Chain brake, not activated
(left)
Choke lever in "open position".
Choke lever in "closed position".
Air purge
2 – English
KEY TO SYMBOLS
Refuelling.
Chain oil ll.
Adjustment of the oil pump
Recommended cutting
equipment in this example: -
Bar length 14 inches - Max.
nose radius 9 Teeth - Chain
type RedMax H37
Other approved bar and chain
combinations in Operator's Manual.
Measured maximum kickback value with
brake for the bar and chain combination
on the label.
Measured maximum kickback value
without triggering the brake, for the bar
and chain combination on the label.
Other symbols/decals on the machine refer to special
certication requirements for certain markets.
RedMax H37
9T
14"
XX
XX