Publicidad
INSTALLATION INSTRUCTIONS
Apply
sealant tape.
Apply sealant tape to one end of a 1/2" NPT nipple.
Install the nipple to extend 11/16" (17 mm) beyond the fi nished wall.
Ensure the gap between the nipple and fi nished wall is no more than 3/8" (10 mm).
Apply sealant tape to the exposed threads of the nipple.
Thread the wall bracket onto the nipple.
Using a clean strap wrench, tighten the bracket fl ush to the wall with the outlet oriented down.
Apply a bead of clear sealant around the perimeter of the bracket.
Turn on the water and allow water to fl ow through the bracket to fl ush out debris.
Check connection for leaks. Repair as needed.
1230883-2-B
3 of 3
1. INSTALL THE PIPE NIPPLE
1/2" NPT
Nipple
2. INSTALL THE WALL BRACKET
Apply sealant tape.
Integrated Supply Elbow
11/16" (17 mm) Beyond
Finished Wall
Wall Bracket
Outlet
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Wall Bracket with
3/8" (10 mm)
Max
1-5/8" (41 mm) Max
Publicidad
