Publicidad
INSTALLATION INSTRUCTIONS
Ensure the valve stem adapter is lightly placed over the spline adapter.
Place the handle assembly over the valve stem adapter.
Turn the handle counterclockwise until the valve is fully closed. The handle should be in the vertical, 6
o'clock position.
Remove the handle assembly and set aside.
Handle Alignment Adjustments
NOTE: The spline adapter allows fi ne adjustment of the handle alignment.
Remove the handle assembly and the valve stem adapter.
Reposition the spline adapter.
Reinstall the handle assembly and the valve stem adapter.
Check the alignment.
Repeat until the handle alignment is satisfactory.
1072177-2-G
4 of 6
2. ADJUST THE HANDLE ASSEMBLY
Spline Adapter
Valve Stem Adapter
Volume Control Valve Trim
Handle Assembly
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Publicidad
