Descargar Imprimir esta página

Greenlee CM-660 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information
Electric shock hazard:
• Unless measuring voltage, current, or frequency, shut off and lock out power. Make
sure that all capacitors are discharged. Voltage must not be present.
• Set the selector and connect the test leads so that they correspond to the intended
measurement. Incorrect settings or connections can result in incorrect measure-
ments or damage to the unit.
• Using this unit near equipment that generates electromagnetic interference can
result in unstable or inaccurate readings.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
• Do not change the measurement function while the test leads are connected to a
component or circuit.
• Do not clamp the jaw around a conductor carrying a frequency greater than 400 Hz.
The magnetic circuitry may reach a hazardous temperature if this frequency is
exceeded.
Failure to observe these precautions may result in injury and can damage the unit.
Electric shock hazard:
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Do not expose the unit to extremes in temperature or high humidity. Refer to
"Specifications."
Failure to observe these precautions may result in injury and can damage the unit.
CM-660 • CM-860 • CM-960 • CMH-600 • CMI-600
5

Publicidad

loading

Este manual también es adecuado para:

Cm-860Cm-960Cmh-600Cmi-600