Publicidad
Idiomas disponibles
Idiomas disponibles
4
:
Disengage the chain brake:
Pull the hand guard (4) toward
the handle.
6
5
:
Unscrew the nut (5) and remove
the cover (6).
MS 200
7
8
:
Turn screw (7) counterclockwise
until the tensioner slide (8) butts
against left end of housing slot.
9
10
:
Fit the guide bar over the stud (9)
and engage the peg of the tensioner
slide in locating hole (10).
English / USA
Wear work gloves to protect your
hands.
11
:
Fit chain around the sprocket (11)
and over the guide bar – cutting
edges on top of bar must point to
bar nose.
7
:
Now turn tensioning screw (7)
clockwise until there is very little
chain sag on the underside of the
bar – and the drive link tangs are
located in the bar groove.
27
Publicidad
