Motor Management - Stihl MS 200 Manual De Instrucciones

English / USA
: Lift air filter and pull it away to the
rear.
40
: Press end of air filter against a flat
surface – this pushes the filter cover
upward.
: Wash the filter in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
: Always replace a damaged filter.
: Refit the filter cover (peg must snap
into position) and then install the
filter.

Motor Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
MS 200