Publicidad
Idiomas disponibles
Idiomas disponibles
English / USA
Filling Chain
Oil Tank
:
Thoroughly clean the the oil fille cap
and the area round it to ensure that
no dirt falls into the tank.
:
Remove the filler cap
:
Refill the chain oil tank every time
you refuel.
:
Close the filler cap
There must still be a small amount of oil
in the oil tank when the fuel tank is
empty.
If the oil tank is still partly full, the reason
may be a problem in the oil supply
system: Check chain lubrication, clean
the oilways, contact your STlHL dealer
for assistance if necessary.
32
Checking Chain Lubrication
The saw chain must always throw off a
small amount of oil.
Never operate your saw without
chain lubrication. If the chain runs
dry, the whole cutting attachment
will be irretrievably damaged within
a very short time.
Always check chain lubrication and
oil level in tank before starting work.
Every new chain has to be broken in for
about 2 to 3 minutes.
After breaking in chain, check chain
tension and adjust if necessary – see
"Checking Chain Tension".
Chain Brake
Locking chain with chain brake
–
in an emergency
–
when starting
–
at idling speed
The chain is stopped and locked when
the hand guard is pushed toward the bar
nose by the left hand –
or when brake is activated by inertia in
certain kickback situations.
MS 200
Publicidad
