Beninca Brain 24 MBE Manual De Instrucciones página 12

MENU
TCA
IbL
SCL
Sld
PP
PRE
Blc
CLOC
htr
mloc
1mot
12
All manuals and user guides at all-guides.com
FUNCTION
Enables or disables automatic closing
Off: automatic closing disabled
On: automatic closing enabled
Enables or disables condominium function.
Off: condominium function disabled.
On: condominium function enabled. The step-by-step impulse
or transmitter impulse has no effect during the opening phase.
Enables or disables rapid closing
On: rapid closing enabled. With the gate open or in the opening
phase the intervention of the photocell causes automatic closing
after 3 s. Active only with TCA:ON.
Off: rapid closing disabled.
Enables or disables slowing.
Off: Slowing excluded.
On: Slowing active.
Selects the operating mode of the "Step by step button" and of
the transmitter.
Off: Operation: OPEN > STOP > CLOSE > STOP >
On: Operation: OPEN > CLOSE > OPEN >
Enables or disables pre-blinking.
Off: Pre-blinking disabled.
On: Pre-blinking enabled. Blinking is activated 3s before the
motor starts.
The lock function is enabled or disabled.
Off: Lock function disabled.
On: Lock function enabled. After the activation of closure limit
switches the control unit delays the stop by approx. 0.5s in or-
der to allow a better resting of the gate against the stoppers.
Selects the mode of the OPEN input
Off: OPEN input with OPEN function
On: OPEN input with CLOCK function.
To be used for connection to a timer for timed opening/closing.
(Contact CLOSED- gate open, Contact open, normal opera-
tion).
Enables or disables Man present function.
Off: Automatic operation.
On: Man Present operation.
The OPEN/CLOSE buttons must be held down during the whole
manoeuvre.
Selects the type of electric lock used.
Off: Electric lock with latch, normally not fed.
Before each opening manoeuvre power is fed at 12Vac for the
time set by the parameter TLOC.
On: Magnetic electric lock, normally fed at 12Vac.
Before each opening manoeuvre the power supply is interrupted
for the time set by the parameter TLOC.
Select the 1/2 motors operating mode:
Off: Both motors operating.
On: Only motor 1 operating.
Settable values
MEMO
ON-OFF-(Default)
(ON)
(OFF)
(OFF)
(OFF)
(OFF)
(OFF)
(ON)
(OFF)
(OFF)
(OFF)
(OFF)