Publicidad
Idiomas disponibles
Idiomas disponibles
Step
Press
Display
1
2
3
4
5
6
7
8
9
10
11
12
13
In the event of malfunctions, by pressing key + or - the status of all inputs (limit switches, control and safety) can be displayed. One
segment of the display is linked to each input. In the event of failure it switches on according to the following scheme.
N.C. inputs are represented by the vertical segments. N.O. inputs are represented by the horizontal segments.
For example, with the leaves
completely closed the display
is as follows:
14
All manuals and user guides at all-guides.com
PAR
First menu
TCA
First function of the first menu
040
Value currently set for the function selected
100
Set the desired value with the <+> and <-> keys
PRG
The value is programmed
TCA
When programming has been made, the display goes to the function just set
PAR
Press <+> and <-> simultaneously to go to the higher menu
Log
Second menu
TCA
First function of the second menu
Pre
Press <-> several times to select PRE logic
OFF
Value currently set for the function selected
ON
Set the desired value with the <+> and <-> keys
PRG
The value is programmed
Pre
When programming has been made, the display goes to the function just set
Press <+> and <-> simultaneously to go to the higher menu and quit programming or
PAR
wait 30s.
����
����
����
������
the moment an Open impulse
is given:
Notes
Diagnostics
����
����
����
���
����
�����
����
���
during the opening phase:
with the leaves completely
open:
Publicidad
